Specifications:
Supply Voltage: 9~40VDC
Operating Temperature: -10 to 45 Celsius
Storage temperature: -40 to 70 Celsius
Max Drive Current: 4A
Chopping Frequency: 20KHZ
Package Included: 1x 4A Stepper Motor Driver Controller
Specification:
Step angle: 1.8 degrees
Number of phases: 2
Voltage: 3,78V
Current: 4,2 A
Resistance: 1.6 ohms
Torque: 2.8 Nm
Shaft diameter: 8 mm
Number of cables: 4
Weight: 1.7 kg
Specification:
Teeth: 20
Groove Width: 7mm
Total Width: 16mm
Diameter of Bore: 5mm
Flange: Double
Material: Aluminium
Specification:
Lenght: 1 m
Width: 6 mm
Pitch: 2 mm
Material: fiber reinforeced rubber
Specifications:
Model: A4988
3.3 and 5 V compatible logic supply
VMOT: 8V - 30V
Max Current: 1A
The optional five step mode: full, 1/2, 1/4, 1/8 and 1/16
Dimension: 15 x 20mm
Specification:
Teeth: 20
Groove Width: 6 mm
Total Width: 9 mm
Diameter of Bore: 5 mm
Material: Aluminium
Specifications:
Model: L298N
Logic power supply: 5V
Control Power: 7 - 12V (max 30V)
Maximum current: 2A
Size: 42 x 42 x 28 mm
Specifications:
Model: DRV8825
VMOT: 8,5V - 36V
Max Current: 1,5A (2.2A with heatsink and forced air cooling)
The optional six step mode: full, 1/2, 1/4, 1/8, 1/16 and 1/32
Dimension: 15 x 20mm
Specification:
Step angle: 1.8 degree
Number of phases: 2
Current: 5A
Resistance: 1 Ohm
Holding torque: 2 N.M
Shaft diameter: 8 mm
Motor Weight: 1050g
Specification:
Step angle: 1.8 degrees
Number of phases: 2
Voltage: 4.8V
Current: 3 A (peak 4,2A)
Resistance: 1.6 ohms
Torque: 2.8 Nm
Shaft diameter: 8 mm
Number of cables: 4
Weight: 1.7 kg
Specification:
Step angle: 1.8 degrees
Number of phases: 2
Voltage: 3V
Current: 3A
Nema 23 torque: 1.9 N.m
Ratio: 20: 1
Shaft diameter: 8 mm
Specification:
Step angle: 1.8 degree
Number of phases: 2
Current: 3 A
Holding torque: 1.8 Nm
Shaft diameter: 6,35 mm
Specification:
Step angle: 1.8 degrees
Number of phases: 2
Voltage: 3.8V
Current: 1.5A
Torque: 0.38 N.M.
Shaft diameter: 5 mm
Shaft length 21 mm
Dimensions: 42 x 42 x 40mm
Weight: 292 grams
Specifications:
Supply Voltage: 9~40VDC
Operating Temperature: -10 to 45 Celsius
Storage temperature: -40 to 70 Celsius
Max Drive Current: 4A
Chopping Frequency: 20KHZ
Package Included: 1x 4A Stepper Motor Driver Controller
Specification:
Step angle: 1.8 degree
Number of phases: 2
Current: 4A
Resistance: 1 Ohm
Holding torque: 2,8 N.M
Shaft diameter: 8 mm
Specification:
Step angle: 1.8 degree
Number of phases: 2
Current: 4 A
Holding torque: 1.9 Nm
Shaft diameter: 8 mm
Specification:
Step angle: 1.8 degree
Number of phases: 2
Current: 6A
Resistance: 0,3 Ohm
Holding torque: 5 N.M
Shaft diameter: 14 mm
Specifications:
Module for DRV8825 and A4988 drivers
Input voltage: 12V - 24V
Optional microstep mode
Dimensions: 42 x 42 x 15 mm
Specification:
Speed: 0.12 sec/60 degrees
Torque: 1.2 kg/42.3 oz (4.8 V); 1.6 kg/56.4 oz (6.0 V)
Temperature Range: -30 to +60 ° C
Operating Voltage: 3.0-7.2 Volts
Weight: 14g
Dimensions: 22x11.5x27mm
Specification:
Step angle: 1.8 degree
Number of phases: 2
Current: 3A
Resistance: 1 Ohm
Holding torque: 1,1 N.M
Shaft diameter: 8 mm
Total length: 75,6 mm
Specification:
Step angle: 1.8 degrees
Number of phases: 2
Voltage: 3V
Current: 3A
Nema 23 torque: 1.9 N.m
Ratio: 20: 1
Shaft diameter: 8 mm
